Father’s Day Sale: 15% off Sitewide w/code DAD15 (excludes sale items / ends Sun 6/21 at 9pm CST)
ANNIV40 for 40% OFF sitewide (no stacking, no sale items) ANNIV40 for 40% OFF sitewide (no stacking, no sale items) ANNIV40 for 40% OFF sitewide (no stacking, no sale items) ANNIV40 for 40% OFF sitewide (no stacking, no sale items) ANNIV40 for 40% OFF sitewide (no stacking, no sale items)

How to Store Peptides

Published November 17, 2026

Dry peptide powder is best kept at −20 °C for the long term. The storage note that the UK’s National Institute for Biological Standards and Control (NIBSC) publishes with its peptide library prefers −20 °C (−4 °F) for long-term storage, and Renovita Research’s product pages list storage as “−20 °C or below”.

Solutions are the less certain form: NIBSC calls their shelf life limited, and the cited studies report no significant activity loss for LHRH after 2 years at 4 °C and almost all activity lost for tuftsin after 6 months at 25 °C.

This guide summarises published sources: that note and peer-reviewed stability studies, each named with the peptide it tested.

How should lyophilized peptides be stored?

Lyophilized peptides, meaning peptides freeze-dried into a powder, are stored cold, dry and dark in the published guidance. The NIBSC note, which says it passes on the manufacturer’s data, states:

  • for best preservation, 4 °C or colder, away from bright light
  • dry peptides are stable at room temperature for days to weeks
  • for long-term storage, −20 °C is preferred

The product page for BPC-157 – 10mg (RESEARCH USE ONLY) lists storage as “−20 °C or below”, as do the RR-HSP 30mg, Melanotan I 10mg and Tri Blend pages.

Renovita Research’s peptides are research-grade peptides sold strictly for laboratory and research use only, not for human or animal consumption, and ship only to addresses within the United States.

Do peptides need to be refrigerated?

Peptide powder keeps for days to weeks at room temperature in the NIBSC note, with 4 °C or colder best and −20 °C preferred for the long term. The cited solution studies report no significant activity loss for LHRH after 2 years at 4 °C and rapid activity loss for tuftsin at 5 °C.

  • A 1984 study found no significant decrease in activity of luteinizing hormone-releasing hormone (LHRH) in aqueous solution stored at 4 °C for 2 years.
  • A 1991 study of tuftsin, a four-residue peptide, found sterile saline solutions stored at 25 °C or 5 °C lost activity “rather rapidly”. The authors concluded that tuftsin solutions must be frozen for storage.

Each tested one peptide, so neither gives a figure for other sequences.

How should reconstituted peptides be stored?

Reconstituted peptides, meaning peptides dissolved in a liquid, have a limited shelf life in the NIBSC note, “especially for peptides containing C, M, N, Q, and W” (cysteine, methionine, asparagine, glutamine and tryptophan). On solutions, the note says:

  • sterile buffers at a pH of around 5 to 6 prolong storage life
  • aliquots, meaning small single-use portions, keep at −20 °C or colder
  • frost-free freezers vary widely in temperature during defrost cycles
  • repeated freeze-thaw cycles are harmful to peptides

The studies show how much this varies. Tuftsin stored at −20 °C or −70 °C still lost activity, though gradually. LHRH, by contrast, showed no significant loss after repeated freezing and thawing for 5 days in the 1984 study.

How long do peptides last?

Peptides last from days to years depending on form, temperature and sequence. The table lists each result with its source.

MaterialStorageResultSource
Dry peptides (manufacturer data)Room temperatureStable for days to weeksNIBSC
Dry peptides (manufacturer data)−20 °CPreferred for long-term storage, no time givenNIBSC
LHRH, sterile aqueous solution4 °CNo significant activity loss at 2 yearsShi 1984
LHRH, sterile aqueous solution37 °CNo significant activity loss up to 10 weeksShi 1984
LHRH, nonsterile solutionAmbientDegradation products and lower potency at 4 monthsShi 1984
Tuftsin, sterile saline25 °CAlmost all activity lost by 6 monthsNishioka 1991
Tuftsin, sterile saline−20 °C and −70 °CGradual loss of activityNishioka 1991

What makes peptides degrade?

Moisture and heat are what the studies measured, in an antibody and in IgG; for peptides, the NIBSC note warns about moisture and a 2015 review flags sequence. On powder, the note states: “Contamination with moisture will greatly decrease long term stability of solid peptides.” The note ties this to opening cold vials and says they are warmed to room temperature first.

Studies on freeze-dried proteins measured the moisture effect directly:

  • A 2001 study of a freeze-dried antibody with 1% to 8% residual moisture found high moisture lowered chemical stability, while every formulation was stable at 5 °C.
  • The 2020 IgG study reported no significant difference in monomer or antigen-binding activity losses at −20 °C and 20 °C over 6 months. At 45 °C, it reported losses in monomer content. It also found that over-drying can be an issue.

Heat shows up in the LHRH work too: heating to 60 °C in a pH 9.0 buffer for up to 11 days produced clear degradation products.

Which amino acids make a peptide harder to store?

Asparagine, aspartic acid, methionine, tryptophan and cysteine are the residues a 2015 review of peptide development names as sites of potential chemical change. Its authors add that peptide properties “tend to be as diverse as the molecules themselves”.

Amino acidWhat can happenSource
Asparagine (N)DeamidationFurman 2015
Aspartic acid (D)IsomerizationFurman 2015
Methionine (M), tryptophan (W), cysteine (C)OxidationFurman 2015
C, M, N, glutamine (Q), WLimited shelf life in solutionNIBSC

What kind of container should peptides be stored in?

Glass and plastic vials are both “generally satisfactory” in the NIBSC note, which adds that peptides in solution “can and do adsorb to many materials”, most of all at high dilution. Three studies tested that loss:

  • Cetrorelix, 2004: at 0.2 to 4 µg/ml, adsorption ran glass, then polypropylene and polyethylene, then PTFE (a non-stick plastic) lowest, with large differences between glass vials from different suppliers.
  • Atrial natriuretic peptide, 1991: 10% to 31% adsorbed to a polystyrene tube, and adsorption was also seen on siliconized glass and polypropylene.
  • TB-500 and three other peptides, 2017: a Ghent University doping-control lab found low-bind consumables were “not beneficial in all cases”; the abstract does not name the TB-500 form tested.

How to tell if peptides have gone bad

A purity test alone did not show a loss of activity in the 1991 tuftsin study. Tuftsin stored at 25 °C lost almost all activity by 6 months, while HPLC, a lab purity test, detected only 1% impurities. (The abstract says “all” in one sentence and “almost all” in the next; this guide uses the smaller.) In the 1984 LHRH study, HPLC and a cell bioassay agreed well. Purity and activity are two measurements, and here they split.

Why do peptide storage numbers online disagree?

The cited studies report different results for different peptides under different storage conditions: LHRH kept 2 years at 4 °C, while tuftsin lost almost all activity by 6 months at 25 °C. The NIBSC note passes on manufacturer data and gives no time for −20 °C, and the 2015 review reads each peptide’s weak points from its sequence.

The BPC-157 10mg product page lists storage as “−20 °C or below”. Other products appear in the peptide category, including TB-500 – 10mg (RESEARCH USE ONLY).

Shopping Cart

Before You Enter

Renovita Research products are sold strictly for laboratory and research use only. Please confirm the following before continuing.

Scroll to Top